What are the codes for buttons on my Partner system?

If you want to program a button for commonly used features, below is a list of the features.   Not all features wil work on all systems, so check your manual to be sure.

Remember, to program a button, first go to the phone:

Press FEATURE 00  (zero, zero)

press the button you want to program,

Press the feature code

Feature 00 (zero, zero) to exit programming.

F01	Do Not Disturb2
F02	Exclusive Hold2
F03	Recall
F04	Save Number Redial
F05	Last Number Redial
F06	Conference Drop2
F07	Privacy2
F08	Touch-Tone Enable
F09XX	Message Light On1
F10XX	Message Light Off1
F11,XX,XX	Call Forwarding/Call Follow-Me1
F11,XX,*PP	Cell Phone Connect1
F11,XX,PP	Remote Call Forwarding1
F12	Account Code Entry2
F13XX	Manual Signaling (beep or ring)1
F13*XX	Manual Signaling (voice signal)1
F14	Voice Mailbox Transfer2
F15	VMS Cover2
F16	Caller ID Name Display2
F17	Caller ID Inspect2
F18	Voice Interrupt On Busy Talk-Back2
F19	Background Music2
F20, XX,XX	Call Coverage1
F21	Station Lock
F22	Station Unlock2
F23	Caller ID Call Logging and Dialing2
F24	Record-a-Call2
F25	Call Screening2
F41	Contact Closure 1
F42	Contact Closure 2
F59	System Release Status2
1 These features can be used by the telephone user and the System Administrator. F represents the “FEATURE” button I represents the “INTERCOM” button; XX represents a system extension number; PP represents a Personal Speed Dial code; G represents a single-digit group number; and LL represents a system line number.
2 Available only on system phones.