How do I program system speed dials on my Nortel 8×24, 6×16, 3×8?

If you are unsure what “Next” and “Show” mean, see this post:  Access admin programming.

To Log Into System Programming:
1. Press FEATURE * * 2 6 6 3 4 4
2. Enter Password: 2 6 6 3 4 4       Display will read: ” A. Configuration”
Using the navigation keys, as displayed below, follow the next simple steps:
3. Press: NEXT        Display will read: “B. General Admin”

4. Press: SHOW    Display will read: “1. Sys speed dial”
5. Press: SHOW     Display will read: “Speed Dial #:___”  HINT: Begin your system Speed Dials with “01”
6. Enter: 01 or 02 or 03 etc…      Display will read: “Speed dial #:01”
7. Press: SHOW     Display will read: “No number stored”
8. Press the “CHANGE” softkey.     Display will read: “#01:
9. Enter the Speed Dial number
10. Press the “OK” softkey.
11. Press: NEXT     Display will read: “Use prime line”
12. Press: NEXT     Display will read: “Display digits:Y”
13. Press: NEXT     Display will read: “Bypass restr’n:N”
14. Press: NEXT     Speed dial 01 has now been programmed:

To program another Speed Dial Number, repeat steps 6 thru 14.