How do I get into programming on my Norstar 3×8, 6×16 and 8×24?

Programming must be done from any M7310, T7316, or M7324 model phone set.

To Log Into System Programming:
1. Press FEATURE * * 2 6 6 3 4 4
2. Enter Password: 2 6 6 3 4 4       Display will read: ” A. Configuration”
Using the navigation keys, as displayed below,

After logging into programming, you will need to know how to get around the menu structure.

Below are pictures of phones and the buttons you will need to remember.

If the main system unit (KSU) looks like one of the following, you’ll use this set of instructions:
(Show below, left to right: 8×24, 6×16, 3×8)

Once you’re in administration mode, the function of some of the buttons on your phone will change, as labeled below.  Once you exit programming mode, the function of the buttons will return to normal.
(Shown below, left to right: M7324, M7310).  You can also use the T7316 to program.